hpmcounter27
User-mode Hardware Performance Counter 24
Alias for M-mode CSR mhpmcounter27.
Privilege mode access is controlled with mcounteren.HPM27 <%- if ext?(:S) -%> , scounteren.HPM27 <%- if ext?(:H) -%> , and hcounteren.HPM27 <%- end -%> <%- end -%> as follows:
<%- if ext?(:H) -%>
hpmcounter27 behavior |
||||||
---|---|---|---|---|---|---|
S-mode |
U-mode |
VS-mode |
VU-mode |
|||
0 |
- |
- |
|
|
|
|
1 |
0 |
0 |
read-only |
|
|
|
1 |
1 |
0 |
read-only |
read-only |
|
|
1 |
0 |
1 |
read-only |
|
read-only |
|
1 |
1 |
1 |
read-only |
read-only |
read-only |
read-only |
<%- elsif ext?(:S) -%>
hpmcounter27 behavior |
|||
---|---|---|---|
S-mode |
U-mode |
||
0 |
- |
|
|
1 |
0 |
read-only |
|
1 |
1 |
read-only |
read-only |
<%- else -%>
hpmcounter27 behavior |
|
---|---|
U-mode |
|
0 |
|
1 |
read-only |
<%- end -%>
Software read
This CSR may return a value that is different from what is stored in hardware.
if (mode() == PrivilegeMode::S) {
if (CSR[mcounteren].HPM27 == 1'b0) {
raise(ExceptionCode::IllegalInstruction, mode(), $encoding);
}
} else if (mode() == PrivilegeMode::U) {
if (CSR[misa].S == 1'b1) {
if ((CSR[mcounteren].HPM27 & CSR[scounteren].HPM27) == 1'b0) {
raise(ExceptionCode::IllegalInstruction, mode(), $encoding);
}
} else if (CSR[mcounteren].HPM27 == 1'b0) {
raise(ExceptionCode::IllegalInstruction, mode(), $encoding);
}
} else if (mode() == PrivilegeMode::VS) {
if (CSR[hcounteren].HPM27 == 1'b0 && CSR[mcounteren] == 1'b1) {
raise(ExceptionCode::VirtualInstruction, mode(), $encoding);
} else if (CSR[mcounteren].HPM27 == 1'b0) {
raise(ExceptionCode::IllegalInstruction, mode(), $encoding);
}
} else if (mode() == PrivilegeMode::VU) {
if (CSR[hcounteren].HPM27 & CSR[scounteren].HPM27) == 1'b0) && (CSR[mcounteren].HPM27 == 1'b1 {
raise(ExceptionCode::VirtualInstruction, mode(), $encoding);
} else if (CSR[mcounteren].HPM27 == 1'b0) {
raise(ExceptionCode::IllegalInstruction, mode(), $encoding);
}
}
return read_hpm_counter(27);