pmpcfg3
PMP Configuration Register 3
PMP entry configuration
Attributes
CSR Address |
0x3a3 |
|---|---|
Defining extension |
Smpmp, version >= Smpmp@1.11.0 |
Length |
64-bit |
Privilege Mode |
M |
Fields
pmp12cfg
- Location
-
pmpcfg3[7:0] - Description
-
PMP configuration for entry 12
The bits are as follows:
Name
Location
Description +
L
7
Locks the entry from further modification. Additionally, when set, PMP checks also apply to M-mode for the entry.
-
6:5
Reserved Writes shall be ignored.
A
4:3
Address matching mode. One of:
+ [when="PMP_GRANULARITY < 2"] * OFF (0) - Null region (disabled) * TOR (1) - Top of range * NA4 (2) - Naturally aligned four-byte region * NAPOT (3) - Naturally aligned power of two
+ [when="PMP_GRANULARITY >= 2"] * OFF (0) - Null region (disabled) * TOR (1) - Top of range * NAPOT (3) - Naturally aligned power of two
+
Naturally aligned four-byte region, NA4 (2), is not valid (not needed when the PMP granularity is larger than 4 bytes).
+
X
2
When clear, instruction fetches cause an
Access Faultfor the matching region and privilege mode.W
1
When clear, stores and AMOs cause an
Access Faultfor the matching region and privilege mode.R
0
When clear, loads cause an
Access Faultfor the matching region and privilege mode.The combination of R = 0, W = 1 is reserved.
- Type
RW-R |
Read-Write Restricted Field is writable by software. Only certain values are legal. Writing an illegal value into the field is ignored, and the field retains its prior state. |
- Reset value
-
0
- Software write
-
This field has special behavior when written by software (e.g., through csrrw).
When software tries to write
csr_value, the field will be written with the return value of the function below.if ((pmpcfg3.pmp12cfg & 0x80) == 0) { if (! { if (csr_value.pmp12cfg & 0x18) != 0x10 { return csr_value.pmp12cfg; } } } return pmpcfg3.pmp12cfg;
pmp13cfg
- Location
-
pmpcfg3[15:8] - Description
-
PMP configuration for entry 13
The bits are as follows:
Name
Location
Description +
L
15
Locks the entry from further modification. Additionally, when set, PMP checks also apply to M-mode for the entry.
-
14:13
Reserved Writes shall be ignored.
A
12:11
Address matching mode. One of:
+ [when="PMP_GRANULARITY < 2"] * OFF (0) - Null region (disabled) * TOR (1) - Top of range * NA4 (2) - Naturally aligned four-byte region * NAPOT (3) - Naturally aligned power of two
+ [when="PMP_GRANULARITY >= 2"] * OFF (0) - Null region (disabled) * TOR (1) - Top of range * NAPOT (3) - Naturally aligned power of two
+
Naturally aligned four-byte region, NA4 (2), is not valid (not needed when the PMP granularity is larger than 4 bytes).
+
X
10
When clear, instruction fetches cause an
Access Faultfor the matching region and privilege mode.W
9
When clear, stores and AMOs cause an
Access Faultfor the matching region and privilege mode.R
8
When clear, loads cause an
Access Faultfor the matching region and privilege mode.The combination of R = 0, W = 1 is reserved.
- Type
RW-R |
Read-Write Restricted Field is writable by software. Only certain values are legal. Writing an illegal value into the field is ignored, and the field retains its prior state. |
- Reset value
-
0
- Software write
-
This field has special behavior when written by software (e.g., through csrrw).
When software tries to write
csr_value, the field will be written with the return value of the function below.if ((pmpcfg3.pmp13cfg & 0x80) == 0) { if (! { if (csr_value.pmp13cfg & 0x18) != 0x10 { return csr_value.pmp13cfg; } } } return pmpcfg3.pmp13cfg;
pmp14cfg
- Location
-
pmpcfg3[23:16] - Description
-
PMP configuration for entry 14
The bits are as follows:
Name
Location
Description +
L
23
Locks the entry from further modification. Additionally, when set, PMP checks also apply to M-mode for the entry.
-
22:21
Reserved Writes shall be ignored.
A
20:19
Address matching mode. One of:
+ [when="PMP_GRANULARITY < 2"] * OFF (0) - Null region (disabled) * TOR (1) - Top of range * NA4 (2) - Naturally aligned four-byte region * NAPOT (3) - Naturally aligned power of two
+ [when="PMP_GRANULARITY >= 2"] * OFF (0) - Null region (disabled) * TOR (1) - Top of range * NAPOT (3) - Naturally aligned power of two
+
Naturally aligned four-byte region, NA4 (2), is not valid (not needed when the PMP granularity is larger than 4 bytes).
+
X
18
When clear, instruction fetches cause an
Access Faultfor the matching region and privilege mode.W
17
When clear, stores and AMOs cause an
Access Faultfor the matching region and privilege mode.R
16
When clear, loads cause an
Access Faultfor the matching region and privilege mode.The combination of R = 0, W = 1 is reserved.
- Type
RO |
Read-Only Field has a hardwired value that does not change. Writes to an RO field are ignored. |
- Reset value
-
0
- Software write
-
This field has special behavior when written by software (e.g., through csrrw).
When software tries to write
csr_value, the field will be written with the return value of the function below.if ((pmpcfg3.pmp14cfg & 0x80) == 0) { if (! { if (csr_value.pmp14cfg & 0x18) != 0x10 { return csr_value.pmp14cfg; } } } return pmpcfg3.pmp14cfg;
pmp15cfg
- Location
-
pmpcfg3[31:24] - Description
-
PMP configuration for entry 15
The bits are as follows:
Name
Location
Description +
L
31
Locks the entry from further modification. Additionally, when set, PMP checks also apply to M-mode for the entry.
-
30:29
Reserved Writes shall be ignored.
A
28:27
Address matching mode. One of:
+ [when="PMP_GRANULARITY < 2"] * OFF (0) - Null region (disabled) * TOR (1) - Top of range * NA4 (2) - Naturally aligned four-byte region * NAPOT (3) - Naturally aligned power of two
+ [when="PMP_GRANULARITY >= 2"] * OFF (0) - Null region (disabled) * TOR (1) - Top of range * NAPOT (3) - Naturally aligned power of two
+
Naturally aligned four-byte region, NA4 (2), is not valid (not needed when the PMP granularity is larger than 4 bytes).
+
X
26
When clear, instruction fetches cause an
Access Faultfor the matching region and privilege mode.W
25
When clear, stores and AMOs cause an
Access Faultfor the matching region and privilege mode.R
24
When clear, loads cause an
Access Faultfor the matching region and privilege mode.The combination of R = 0, W = 1 is reserved.
- Type
RO |
Read-Only Field has a hardwired value that does not change. Writes to an RO field are ignored. |
- Reset value
-
0
- Software write
-
This field has special behavior when written by software (e.g., through csrrw).
When software tries to write
csr_value, the field will be written with the return value of the function below.if ((pmpcfg3.pmp15cfg & 0x80) == 0) { if (! { if (csr_value.pmp15cfg & 0x18) != 0x10 { return csr_value.pmp15cfg; } } } return pmpcfg3.pmp15cfg;